URBAN ENERGY POLYTHERMAL INSULATION SPRAY

Benefits & Uses

A FEW OF MANY APPLICATIONS

• Insulate any type of wall/domestic/commercial/agricultural
• Insulate any type of roof/domestic/commercial/agricultural
• Insulate any type of floor/domestic/commercial/agricultural
• Insulate virtually any service.

A FEW OF MANY BENEFITS & FEATURES

Fully Approved: Technical approvals for construction. Carries a BBA Approval Inspection Testing Certification. Agrement Certificate No 11/4816. BASF POLYURETHANES WALLTITE.

Agrement Certification Includes as follows

• Factors relating to compliance with all building regulations where applicable
• Factors relating to additional non-regulatory information where applicable
• Independently verified technical investigations
• Design considerations
• Insulation guidance
• Regular surveillance of production
• Formal three-yearly reviews

Key factors Assessed

Practicability of installation: The product should only be installed by contractors trained and approved the certificate holder. 

Thermal performance: When installed at the appropriate thickness, the product can enable roofs to meet or improve on U values for existing building regulations.

Condensation risk: The product has a water vapour resistivity approximately 306 MN.s.g-1.m-2, but the risk of interstitial condensation will depend on the roof construction and should be assessed for each project. 

Adhesion: The product bonds sufficiently to slate and clay tiles Weather tightness: The product will contribute towards the roof covering resisting the passage of water, wind-blown snow and dust into the interior of the building.

Behaviour in relation to fire: The product has a class 1 surface spread of flame rating and may be used in suitable roof constructions. 

Durability: The durability of the product is satisfactory and should remain effective for at least 20 years. Full BBA Certificate produced on request.

Continued benefits and features...

• Normally applied in one-two days
• Very low thermal conductivity not achieved by conventional materials
• With stands wind damage well in access of 100 miles an hour
• No dust and grit caused by chafing slates and tiles (cleaner air)
• Saves pounds on heating bills, up to 80% reduction in heat loss
• Helps to eliminate condensation
• Protects expensive items for atmospheric changes that cause damage
• Improves efficiency of PV inverters in the loft space
• Creates a warm roof at the top of the building allowing loft floors to be boarded
• Insulates cold floors in cellars
• Insulates walls
• Helps with sound proofing especially in flight paths
• No gaps that cause draughts/loft conversions
• No harmful odours and gasses
• Sets in minutes
• No freezing pipes in the area of the loft or insulated area
• Closed cell to stop insects making nests
• Perfect for loft conversions because no gaps under plaster boarding
• Closed cell with a vapour barrier but air tight to reduce condensation which contributes to mould and mildew
• Increase strength in wall lining systems and no settling and sagging in wall cavity situations
• Extremely light weight and very strong in rigidity
• Controls indoor air quality
• No inhalable fibres are emitted (Fibreglass)

Enquires for a free survey contact

Urban Energy UK LTD
3 Deans Farm Buildings
Phillips Lane, Salisbury Wilts
SP1 3YP
Freephone 0800 232 1624